Publications
[2019-Vol.16-Issue 3]On the Optimal Design of Cable Driven Parallel Robot with a Prescribed Workspace for Upper Limb Rehabilitation Tasks
发布时间: 2019-06-10 10:39  点击:2787

Journal of Bionic Engineering

May 2019, Volume 16, Issue 3, pp 503–513| Cite as

Med Amine LaribiEmail authorGiuseppe CarboneSaïd Zeghloul

1.Department of GMSC, Pprime InstituteCNRS - University of Poitiers - ENSMA - UPR 3346PoitiersFrance

2.Department of Mechanical, Energy and Management EngineeringUniversity of CalabriaRendeItaly

3.CESTERTechnical University of Cluj-NapocaCluj-NapocaRomania

Abstract

This paper deals with an optimization approach to design a cable driven parallel robot intended for upper limb rehabilitation tasks. The cable driven parallel robots have characteristics that make them best candidate for rehabilitation exercise purposes such as large workspace, re-configurable architecture, portability and cost effectiveness. Here, both the cable tensions that are needed to move a wristband as well as the workspace need to be carefully optimized for fulfilling the prescribed operation tasks. A specific case of study is addressed in this work by referring to LARM wire driven exercising device (LAWEX), which is applied to upper limbs exercises. To that end, a motion capture system is used to collect quantitative data on the prescribed workspace of a human upper limb. A specific optimization problem is settled up for considering combining two optimization goals, namely, the smallest robot size reaching a prescribed workspace and the minimum cable tension distributions. A sequence of optimization steps is defined using Genetic Algorithms (GAs) applied to LAWEX robot. The proposed objective function is based on a mathematical formulation of the power of a point with respect to bounding surfaces in combination with a performance index to show the distributions of the minimum cable tensions.

Keywords

LAWEX robot design bionic robot cable-driven robots optimization power of the point rehabilitation tasks 

Full text is available at :

https://link.springer.com/article/10.1007/s42235-019-0041-4

Address: C508 Dingxin Building, Jilin University, 2699 Qianjin Street, Changchun 130012, P. R. China
Copyright © 2024 International Society of Bionic Engineering All Rights Reserved
吉ICP备11002416号-1